Overview
A rivet nut (insert nut) gives a strong, reusable thread in sheet metal, tube or plastic that is too thin to tap. It is fitted from one side with a hand or pneumatic tool. The thin reduced head sits almost flush with the panel. The half-hex body sits in a hex hole and resists spinning under torque.
The open end lets a longer screw pass right through. Available from M4 to M10 with grip ranges from 0.5 mm to 4 mm. Each part number covers a set range of sheet thickness and has its own overall length (L), shown in the table.
Specifications
| Brand | Neufix |
|---|---|
| Part no. series | NF-RHH-IHB-UK |
| Threads | M4, M5, M6, M8, M10 |
| Grip range | 0.5 mm to 4 mm |
| Length (L) | 11 mm to 21 mm |
| Head | Reduced hex head |
| Body | Inner-hex (half-hex) body |
| End | Open end |
| Material | Carbon steel, zinc plated |
Sizes & part numbers
| Part no. | Thread | Grip range (mm) | Length L (mm) |
|---|---|---|---|
| NF-RHH-IHB-UK-0420 | M4 | 0.5-2.0 | 11.0 |
| NF-RHH-IHB-UK-0525 | M5 | 0.5-2.5 | 12.0 |
| NF-RHH-IHB-UK-0630 | M6 | 1.0-3.0 | 15.5 |
| NF-RHH-IHB-UK-0835 | M8 | 1.0-3.5 | 17.0 |
| NF-RHH-IHB-UK-1040 | M10 | 1.0-4.0 | 21.0 |
Key features
- Strong thread in thin sheet
- One-sided installation
- Through thread
Applications
Electrical panels and enclosuresAutomotiveFurnitureSolar structures
Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →
Related products
All products →You may also need
Flat Head Knurled Body Rivet NutFlat head, round knurled body, open end. M3 to M12, carbon steel, zinc plated.View details →
Flat Head Knurled Body Rivet Nut, Closed EndFlat head, round knurled body, closed end. M4 to M10, carbon steel, zinc plated.View details →
Reduced Head Knurled Body Rivet NutReduced (thin) head, round knurled body, open end. M3 to M12, carbon steel, zinc plated.View details →
Reduced Head Knurled Body Rivet Nut, Closed EndReduced (thin) head, round knurled body, closed end. M4 to M12, carbon steel, zinc plated.View details →